一种多站无源联合定位系统的航迹起始方法

为了解决雷达系统面临的4大威胁,多站无源联合定位系统被广泛采用。航迹起始是多站无源联合定位系统对目标进行跟踪的首要问题。分析了多站无源联合定位系统的航迹起始问题的特点,在有源定位系统航迹起始的逻辑法基础上,利用辐射源参数构造多维相关波门进行关联判定,并采用基于最小二乘法的直线拟合方法对航迹作平滑处理,提出了一种针对多站无源联合定位系统的航迹起始方法。仿真实验结果表明了该算法的有效性。     

基于边扫描边跟踪系统的多目标航迹起始相关

系统地研究了基于边扫描边跟踪雷达系统中对多机动目标的航迹起始及点迹-航迹相关。航迹起始采用滑窗法,对于点迹-航迹相关,可将K近邻域法和NN算法结合应用。对该方法的航迹相关准则进行了详细的描述,并与NN算法和K近邻域法进行了比较。     

Shock initiation performance of NTO-based polymer bonded explosive

3-nitro-1,2,4-tri-azol-5-one (NTO) is a high energy insensitive explosive. To study the shock initiation process of NTO-based polymer bonded explosive JEOL-1 (32%octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), 32% NTO, 28% Al and 8% binder system), the cylinder test, the gap experiments and numerical simulation were carried out. Firstly, we got the detonation velocity (7746 m/s) and the parameters of Jones-Wilkins-Lee (JWL) equation of state (EOS) for detonation product by cylinder test and numerical simulation. Secondly, the Hugoniot curve of unreacted explosive for JEOL-1 was obtained calculating the data of pressure and time at different Lagrangian positions. Then the JWL EOS of unreacted explosive was obtained by utilizing the Hugoniot curve as the reference curve. Finally, we got the pressure growth history of JEOL-1 under shock wave stimulation and the parameters of the ignition and growth reaction rate equation were obtained by the pressure-time curves measured by the shock-initiation gap experiment and numerical simulation. The determined trinomial ignition and growth model (IG model) parameters can be applied to subsequently simulation analysis and design of insensitive ammunition with NTO-based polymer bonded explosive.     

A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

Formation of explosively formed penetrator with fins and its flight characteristics

The ultimate goal of weapon system employing an explosively formed penetrator (EFP) is to defeat a target at the longest standoff. In order to do this, an EFP must be aerodynamically stable so as to strike the target at a small angle of obliquity, and the decay velocity per meter of EFP must be smaller at extended standoff. As the angle of attack increases, the penetration ability of EFP greatly reduces. The fins improve the EFP aeroballistic characteristics and decrease the flight drag of EFP as well. EFP with fins formed by three-point initiation is presented. The formation of EFP with fins is studied by LS-DYNA, and the aeroballistics is studied through experiment. The experimental results show that the decay velocity per meter of EFP with fins is much smaller than that of normal EFP, and the attitude angle steadily decreases.     

复杂环境下多雷达点迹融合

针对系统误差、杂波干扰等对点迹融合处理系统的影响,结合工程实践,提出了一种处理复杂环境下多雷达点迹融合结构框架,给出了存在系统误差情形下的多雷达航迹起始、虚假目标抑制、雷达误差配准等模型和算法。仿真结果表明,提出的框架、模型和算法能够有效处理多雷达点迹融合问题。     

一种有源无源联合定位系统的航迹起始方法

为了解决雷达面临的四大威胁和无源定位系统定位精度偏低及被动工作的问题,多站有源无源联合定位系统正在成为研究热点。航迹起始是该系统对目标进行跟踪的首要问题。在航迹起始过程中,系统需要将有源观测点迹和无源观测点迹进行融合,其本质是异类源数据融合问题。分析了有源无源联合定位系统的航迹起始问题的特点,提出了一种针对有源无源联合定位系统的航迹起始方法。仿真实验结果表明了该算法的有效性。     

多点偏心起爆对破片速度增益的影响

多点偏心起爆后,爆轰波相互作用在定向区域内产生了马赫波超压,使得该区域破片速度产生增益.利用爆轰波反射理论,建立多点偏心起爆后爆轰波相互作用特性的理论模型,并确定定向区内破片速度的增益特性.3种不同起爆方式的仿真计算和静爆试验结果对比表明,定向区内不同起爆方式得到的破片增益程度较为吻合.     

REBO模型的平衡态分子动力学模拟

为了得到合适的"计算机实验"的"试样"进行固体炸药冲击起爆现象的分子动力学研究,对REBO模型进行了NVE,NVT两种平衡态分子动力学模拟;作为对比,同时还进行了不施加任何人工干预,系统的演化完全由运动方程驱动的分子动力学模拟,讨论了根据对"试样"的不同要求选择适当模拟方法的原则。     

炸药装药在压剪加载下的起爆特点

进行了两类压剪加载实验：（１）利用石英的平面正碰撞产生压剪加载的实验,采用电磁质速法测试装药试件内部不同质点的运动情况,分析炸药装药中发生化学反应的可能性;（２）在压剪炮上采用平行倾斜碰撞产生压剪加载的实验,观测炸药装药爆炸的可能性。由实验可以看出：在亚爆轰状态的压缩加载应力条件下,剪切的联合作用对炸药的起爆起到敏化作用,适当比例的压剪加载造成更加敏感的炸药起爆响应。文中给出了起爆响应规律和响应机制的实验分析。